SIIG's SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system. It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs. This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.
- General Information
- Manufacturer
- SIIG, Inc
- Manufacturer Website Address
- http://www.siig.com
- Brand Name
- SIIG
- Packaged Quantity
- 1
- Product Type
- SATA Controller
- Warranty
- Limited Warranty
- 5 Year
- Technical Information
- Host Interface
- PCI Express x2
- Controller Type
- Serial ATA/600
- RAID Supported
- Yes
- RAID Levels
- 0
- 1
- 10
- Interfaces/Ports
- Total Number of SATA Ports
- 3
- Physical Characteristics
- Height
- 4.7"
- Width
- 5.8"
- Thickness
- 0.8"
- Form Factor
- Plug-in Card
- Weight (Approximate)
- 2.72 oz
- Miscellaneous
- Package Contents
- SATA 6Gb/s 3i+1 SSD Hybrid PCIe
- 2 x SATA Data Cables
- 4 x Screws
- Driver/Software CD
- Installation Guide
- Additional Information
- Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
- Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
- Supports TRIM to extend the life of SSDs for maximum durability
- HyperDuo mode supports Safe mode and Capacity mode
- 48-bit LBA mode with support up to 4TB hard disk capacity
- Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s & 1.5Gb/s HDDs
- Single Port Multiplier
- Environmentally Friendly
- Yes
- Environmental Compliance
- Restriction of Hazardous Substances (RoHS)
- Country of Origin
- China